2018 Cub Cadet Pro Z 160L EFI
Call for Price
Key Features
Availability
Brochure
Year2018
MakeCub Cadet
ModelPro Z 160L EFI
Product Features
Description
Steering
- Lap Bar / Steering Wheel Adjustment: 3/4 length padded bars w/tooless quick adjust dial
- Lap Bar / Steering Wheel Control: High Performance & Speed Control
Chassis
- Front Axle / Yolks: 2 in. x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yolks
- Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- ROPS: 2 in. x 2 in. spring-latch tool-less foldable 3 position
- Frame: Fully welded, full-legnth 12ga. channel frame with 14ga. reinforcements
Mower Deck
- Spindle Construction: 5 in. sealed cast aluminum housing (maintenance-free)
- Deck Size/Type: 60 in. FABRICATED DECK
- Discharge Chute: High-density, impact-resistant rubber
- Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
- Deck Height Adjustment: Hand Lever / 15 position / spring assist
- Deck Material: Fully welded 10ga. (.135 in.) steel deck shell with reinforcements totaling .560 in.
- Side Construction: 5/16 in.(.313) steel on trim and discharge sides
- Bottom Reinforcement: 7ga. (.175 in.) steel
- Cutting Height: 1 in. - 5 in.
- Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
- Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
- Top Reinforcement(s): 2ga. and 11 ga. top plate
- Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
- Deck Style/Construction: Floating, fabricated 10ga. (.135") steel shell (e-coated)
Operation
- Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
- Front Tires: 13 in. x 6.5 in. - 6 in. (smooth)
- Seat Type: High-back suspension with seat belt, adjustable arm rests and 6 in. seat travel
- PTO Clutch: Warner Clutch - 125 ft lb.
- Rear Tires: 23 in. x 10.5 in. - 12 in. (Turf Master)
- Park Brake / Braking: Intergrated system in Lap Bars
- Cruise Control: N/A
- Engine Start: Electric
- Safety Systems: Operator presence
General
- Cup Holder: Intergrated into Side Pod
- Hour Meter: Standard electronic
Warranty
- Warranty: 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Dimensions
- Weight (approx): 1030 lb.
- L / W / H with discharge chute UP and ROPs DOWN: 80 in. L x 62 in. W x 48 in. H
Engine & Drive System
- Ground Speed: 9.5mph fwd. / 4.5mph rev.
- Horsepower / CC's: 27hp - 747cc
- Engine Type: Kohler Confidant EFI EZT-750
- Fuel Capacity: Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening
- Transmission: 12cc Hydro-Gear® ZT 3400 with charge pumps
Engine
Horse Power | 27hp - 747cc |
Engine Type | Kohler Confidant EFI EZT-750 |
General
Transmission | 12cc Hydro-Gear® ZT 3400 with charge pumps |
Fuel Capacity | Twin tanks - 3.5 gallon ea. (7 gallon total) with oversized filler opening |
Deck
Deck Size | 60 in. FABRICATED DECK |