2018 Cub Cadet PRO Z 560S KW
Call for Price
Key Features
Availability
Brochure
Year2018
MakeCub Cadet
ModelPRO Z 560S KW
Product Features
Description
Specifications
- Steering Wheel Control: Steering wheel w/ quick-adjust tilt column
Steering
- Lap Bar / Steering Wheel Control: High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Chassis
- Frame: Fully welded, full-length 3/8 x 5 in. laser cut steel / integrated tie-down slots
- Rear Bumper: 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- ROPS: 2 in. x 2 in. spring-latch tool-less foldable 3 position
- Front Axle / Yolks: 2 in. x 3 in. solid axle tube and 1/2 in. thick steel front yokes
Operation
- Seat Type: High-back dial suspension with EVC Cushion seat beltangle back adjust arm rests
- Cruise Control: Standard - Foot operated pedal engagement
- Rear Tires: 24 in. x 12 in. - 12 in. (Turf Tread)
- Front Tires: 15 in. x 6 in. - 6 in. smooth (turf)
- Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
- Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto
- PTO Clutch: Warner Clutch - 125 ft lb.
Mower Deck
- Side Construction: 5/16 in.(.313) steel on trim and discharge sides
- Cutting Height: 1 in. - 5 in.
- Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
- Deck Size/Type: 60 in. FABRICATED DECK
- Trim-Side Wear Guard: 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard
- Deck Material: fabricated 7ga. (.187") steel shell
- Spindle Construction: 8 in. sealed cast aluminum housing (maintenance-free)
- Bottom Reinforcement: 7ga. (.187 in.) bottom plate
- Rolled Leading Edge Reinforcement: 1/4 in. (.250 in.) steel
- Discharge Chute: High-density, impact-resistant rubber
- Top Reinforcement(s): 7ga. (.187 in.) top plate
- Deck Height Adjustment: Foot pedal with spring assist 16 Positions
- Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
- Deck Style/Construction: 7ga. top plate 7ga. bottom reinforcement 1/4" rolled leading edge
General
- Cup Holder: Intergrated into Side Pod
- Hour Meter: Standard electronic
Warranty
- Warranty: 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
Dimensions
- L / W / H with discharge chute UP and ROPs DOWN: 84 in. L x 56 in. W x 50 in. H
- Weight (approx): 1424 lb.
Engine & Drive System
- Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge
- Engine Type: Kawasaki FX850v
- Ground Speed: Fwd: 10 mph/Rev: 5 mph
- Horsepower / CC's: 27hp - 852cc
- Transmission: Parker HTJ Series 12cc pump / 260cc wheel motor
Engine
Horse Power | 27hp - 852cc |
Engine Type | Kawasaki FX850v |
General
Transmission | Parker HTJ Series 12cc pump / 260cc wheel motor |
Fuel Capacity | Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge |
Deck
Deck Size | 60 in. FABRICATED DECK |